Bimetal bandsaw blades STB 8

bimetal bandsaw blades STB 8

Bimetal bandsaw blades STB 8

STB 8: Bimetal bandsaw blades with edge steel in HSS AISI M42 alloy 8% Cobalt (Co), body blade consisting of a spring steel with Chromium (Cr), which ensures an optimal balance between flexibility, resistance to fatigue, resistance to twisting and pulling.
The product is suitable for use on any type sawing machine (pivot, or vertical or columns) and for each use on any type of material, from standard steel materials up to very tough materials (till about 45HRC), Aluminium, stainless steel and hastelloy, either on full sections or profiles.
This blade covers 95% of cutting requirements on the national market.

STB 8-PRO: Bimetal blade with M42 8% cobalt edge with special setting and tooth geometry very performing and lasting on tubes, profiles, structurals or whenever customer is using manual machines and has to cut very different sections like pipes and solid.

TECHNICAL SPECIFICATIONS

STB 8

Bimetal blade with M42 8% cobalt for all purposes and all steel from aluminium to stainless steel with high consistency and good general performances.

DIM	*INCHES*	WEIGHT X MT	*TPI*	INOX
6 x 0.6	1/4 x 0,25	0,04	6 10/14
6 x 0.9	1/4 x 0,35	0,04	6 10 10/14 14
10 x 0.6	3/8 x 0,25	0,07	6 10/14
10 x 0.9	3/8 x 0,35	0,07	4 6 8 10 10/14 14
13 x 0.6	1/2 x 0,25	0,06	4 6 6/10 8/12 10 10/14 14 18 24
13 x 0.9	1/2 x 0,35	0,09	3 4 6 6/10 8 8/12 10 10/14 14
20 x 0.9	3/4 x 0,35	0,14	3 4 4/6 5/8 6 6/10 8 8/12 10 10/14 14
27 x 0.9	1 x 0,35	0,19	2 2/3 3 3/4 4 4/6 5/8 6 6/10 8 8/12 10 10/14 14
34 x 1.1	1 1/3 x 0,42	0,29	1.25 2 2/3 3 3/4 4 4/6 5/8 6 6/10 8/12
41 x 1.3	1 5/8 x 0,50	0,41	1.4/2 2 2/3 3 3/4 4 4/6 5/8 6*
54 x 1.3	2 1/8 x 0,50	0,53	1.4/2 2/3 3/4 4/6
54 x 1.6	2 1/8 x 0,63	0,65	0.7/1.2 1.1/1.5 1.4/2 2/3 3/4
67 x 1.6	2 5/8 x 0,63	0,82	0.7/1.2 1.1/1.5 1.2 1.4/2 2/3
80 x 1.6	3 1/8 x 0,63	0,98	0.7/1.2

* fino ad esaurimento scorte

STB 8 - PRO

Bimetal blade with M42 8% cobalt edge with special setting and tooth geometry very performing and lasting on tubes, profiles, structurals or whenever customer is using manual machines and has to cut very different sections like pipes and solid.

DIM	*INCHES*	WEIGHT X MT	*TPI*
20 x 0.9	3/4 x 0,35	0,14	5/7 8/11
27 x 0.9	1 x 0,35	0,19	3/4 4/6 5/7 8/11
34 x 1.1	1 1/3 x 0,42	0,29	2/3 3/4 4/6 5/7
41 x 1.3	1 5/8 x 0,50	0,41	2/3 3/4 4/6
54 x 1.3	2 1/8 x 0,50	0,53	2/3 3/4
54 x 1.6	2 1/8 x 0,63	0,65	2/3 3/4
67 x 1.6	2 5/8 x 0,63	0,82	2/3 3/4
80 x 1.6	3 1/8 x 0,63	0,98	2/3 3/4

Bimetal bandsaw blades STB 8

products

our company

l'esperto risponde

technical specifications

news and information